Master class on jute filigree: Twine bicycle. DIY bicycle flowerpot. Master class DIY flower stands in the shape of a bicycle

Nadezhda Ignatova (Voloshchuk)

Hello my dear friends, a long time ago I had to see on the Internet twine bike, a lot of time has passed since then, but the desire remains. Today is our holiday “Russia Day”, on which I congratulate you all, which means that all kindergarten workers have a day off, and I decided to do twine bike so that the day off is not wasted.

Now I will tell you how I did it. To make it we will be needed:leg-split, titanium glue or hot glue, cocktail tubes, cardboard, anything for decoration (coffee beans, beads, rhinestones, sequins) I used sequins (I store sequins and beads from under jars of gouache, it’s very convenient and nothing gets lost).

So, let's begin.

We cut out three blanks for wheels from hard cardboard. (you can circle a roll of tape, a mug, a glass) I have a rear wheel size of 8 cm, a front wheel of 10 cm. cm:

wrap all the blanks twine:

We make these blanks from 4 cocktail tubes (about 2 cm before and after the fold):

try it on:

wrap it around twine:

glue crosswise:

Glue the crosses into the blanks for the necklace With:

decorate the wheels (front on both sides, rear on one side):

take the tube, bend it and stretch it a little and insert a piece into it (in order for the tube to fit into the tube, you need to cut it a little and insert it with a drop of glue):

the blank is ready, we will need such blanks 2 :

wrap two blanks twine:

make a steering wheel, cut off 2 blanks (2 cm before the fold and 3 after):

connect them:

wrap it around twine:

another blank - a straight tube 11 long cm:

wrap the workpiece twine:

Let's start assembling. We insert a straight tube into the rear wheels and secure it with glue. We insert the blank into the front wheel and insert a piece of the tube between the upper tubes (1.5-2 cm) And paste it in:

wrap up the scrap twine:

We insert another blank into the front wheel (on the side, here So:

We place the front wheel with two glued blanks on the beam of the rear wheels and glue it:

glue the steering wheel:

put it on bicycle wrapped in twine and a flowerpot decorated with beads (for flowerpots you can use boxes of processed cheese, ice cream, sour cream, etc.):

decorate bike with flowers:

flowers for bicycle My 7 year old daughter made these - these are daffodils.

My daughter likes it. I already have 2 crafts from twine:

Thanks to everyone who watched to the end.

This article contains several master classes on making a bicycle quickly and easily with your own hands from scrap materials with step-by-step photos and videos. This product will serve as an excellent element of home decor and will be the subject of surprise and admiration for all guests.

Making the “Flower Bicycle” composition with your own hands

To create this decorative composition we need:

A decorative bicycle, which you can purchase in a specialized store, or you can make it yourself, following master classes from the Internet;
Corrugated paper;
Styrofoam;
Toothpicks, glue, glue gun, thread or wire for attaching flowers;
Decorative elements: tulle, bows, beads, ribbons, homemade beaded flowers, sisal;

First you need to make a small bouquet of flowers from corrugated paper. To do this, you need to cut out a rectangle measuring five by seven centimeters, fold it in half, round one edge and carefully stretch it.

Now you can start making the petals. You need to cut a strip of paper measuring ten by five centimeters and fold it in half twice. Then you need to cut out a petal of the same shape as shown in the photo below, and tuck it a little using an ordinary pen. Next, these petals need to be attached to the bud and secured with wire.
Flowers can be made of any shape and size, and when you have a sufficient number of them, you can begin creating the composition itself. The bottom of the wicker bicycle basket needs to be filled with a piece of foam plastic and flowers made of paper and beads must be secured to it using toothpicks. You can also add green sisal and various elements in the form of decorative bugs and butterflies. Our flower beauty is ready!

Making a bicycle from cocktail straws quickly and easily

To make such a beauty you will need some scrap material and a few hours of free time.

Tools and materials to create this product:

Straws for cocktails;
Disposable plastic cup;
Scissors, toothpicks, cotton swabs, tape;
Threads, bandage.

For greater clarity, this master class is presented in video photo instructions.

In this master class we will show you how to make an original flower pot with your own hands.

A flowerpot in the shape of a bicycle will be a very unusual decoration for your home or a gift for family and friends.
To create such a beauty with your own hands we will need:

Wire two to three millimeters wide;
White tape;
Four white buttons;
Moment glue or glue gun.

First, you need to make three circles of different sizes from wire and wrap them with tape. Now you can add curls to them and secure them well.
The same curls should be used to decorate the entire bicycle.
The next step will be to create a basket for our bicycle. It is made using the same technology as the bicycle itself and secured with glue.
All that remains is to make flowers from candies and decorate the product with them.

We create a very cute decorative bicycle with our own hands

To create such a miracle we will need:

Several cardboard blanks;
Small wooden stick;
A piece of thread, toothpick;
Scissors, glue.

First you need to make a cardboard basket. To do this, you need to glue cardboard strips to the bottom of the product, as shown in the photo below.

And then weave them into a basket.

Using the same method, only without weaving, you need to make three wheels.
Next you need to take a small wooden stick, two strips of cardboard and a thread and use them to make a fork for the future bicycle.

The parts that came out at the end need to be glued together.
The bicycle handlebar is made of cardboard and thread, and is also decorated with some decorative element.

This is what the output should look like:

Let's make a decorative flowerpot-bicycle from twine and aromatic coffee beans

For work we will need:

Cardboard;
Straws for cocktails;
Leg-split;
Coffee beans;
Polymer glue;
Scissors.

Using a compass, you need to draw circles on cardboard, as shown in the photo below, and cut them out using scissors.

Then these blanks must be wrapped with twine.
In the cocktail tube, you need to trim off the excess, leaving about two centimeters from the bend on both sides. You need four of these blanks to make one bicycle wheel. Next, each tube needs to be tightly wrapped with twine.
Now you can assemble the wheels, as shown in the photo below.

Then you need to take two tubes, stretch one, and cut off the top of the other and connect them as in the photo below. Two such blanks need to be wrapped with twine.

The steering wheel must be created by cutting off the upper part of the tube, leaving two centimeters before the bend and three after it. Wrap them with twine.

The next blank for the steering wheel is an eleven-centimeter long tube wrapped with twine.

The wheel should be decorated with coffee beans. It is necessary to insert two blanks into the front wheel and secure them with polymer glue.
You need to insert a straight tube between the rear wheels and secure it with glue.
A piece of tube must be inserted between the upper ones. And wrap the place where they are attached with twine.
The role of a flowerpot here will be played by an empty jar. You can decorate according to your taste.

Video on the topic of the article

At the end of this article there is a selection of thematic videos on how to make a topiary with a bicycle, make a cute cradle for this type of transport, or design your own composition in the steampunk style.

Making the “Flower Bicycle” composition with your own hands

To create this decorative composition we need:

A decorative bicycle, which you can purchase in a specialized store, or you can make it yourself, following master classes from the Internet;
Corrugated paper;
Styrofoam;
Toothpicks, glue, glue gun, thread or wire for attaching flowers;
Decorative elements: tulle, bows, beads, ribbons, homemade beaded flowers, sisal;

Making a bicycle from cocktail straws quickly and easily

To make such a beauty you will need some scrap material and a few hours of free time.

Tools and materials to create this product:

Straws for cocktails;
Disposable plastic cup;
Scissors, toothpicks, cotton swabs, tape;
Threads, bandage.

For greater clarity, this master class is presented in video photo instructions.

In this master class we will show you how to make an original flower pot with your own hands.

A flowerpot in the shape of a bicycle will be a very unusual decoration for your home or a gift for family and friends.
To create such a beauty with your own hands we will need:

Wire two to three millimeters wide;
White tape;
Four white buttons;
Moment glue or glue gun.

We create a very cute decorative bicycle with our own hands

To create such a miracle we will need:

Several cardboard blanks;
Small wooden stick;
A piece of thread, toothpick;
Scissors, glue.

First you need to make a cardboard basket. To do this, you need to glue cardboard strips to the bottom of the product, as shown in the photo below.

And then weave them into a basket.

The parts that came out at the end need to be glued together.
The bicycle handlebar is made of cardboard and thread, and is also decorated with some decorative element.

This is what the output should look like:

Let's make a decorative flowerpot-bicycle from twine and aromatic coffee beans

For work we will need:

Cardboard;
Straws for cocktails;
Leg-split;
Coffee beans;
Polymer glue;
Scissors.

Using a compass, you need to draw circles on cardboard, as shown in the photo below, and cut them out using scissors.

Then you need to take two tubes, stretch one, and cut off the top of the other and connect them as in the photo below. Two such blanks need to be wrapped with twine.

The steering wheel must be created by cutting off the upper part of the tube, leaving two centimeters before the bend and three after it. Wrap them with twine.

The next blank for the steering wheel is an eleven-centimeter long tube wrapped with twine.

Video on the topic of the article

Today's lesson is devoted to such an interesting topic as weaving with jute twine. You can make very interesting things from this material. This master class shows how to make a bicycle box.

We will need:

twine of 2 colors (light twine is made by soaking it in chlorine for a couple of hours);
glue gun;
coffee;
wire;
Titan glue;
dried tangerine skins.

I took my favorite ceiling tile, I really like working with it, it doesn’t lead to glue, it’s easy to cut...
So we cut out 3 wheels.

And we begin to wrap it with twine and double-sided tape.

And then I make the windings of the wheel and secure them together in the center...

And I start wrapping the knitting needles...

Here they are, my wheels, ready!

Now we take the wire of the length you need and begin to wrap it with twine using Titan glue. We use an awl to make holes in the center of the wheels and insert a crossbar wrapped with twine.

Then we cut out a ring with the same diameter as the future box... and wrap it with twine.

Then we'll glue it here. The crossbar should be no less.

Now let’s make the frame of our bike...

I'll show you closer... It was made from 2 parts: the singing part is the steering wheel. We start with the left steering wheel, go around the wheel and cut the wire (I’ll show you why later) and deliver the right steering wheel. (I hope I explained it clearly). My husband glued it together with a soldering iron, but I think it’s possible with a hot gun.
And the second part: we make the letter “l” from the wire, squeezing it at the base and slightly bending the top and gluing it to the steering wheel, and bending the ends and gluing it to the rear crossbar.

Let's try on the box...

This is exactly the detail I described above... This is the steering wheel wrapped only at the bottom, near the wheel. We reach the middle, make a hole in the front wheel and thread a wire into the wheel... It will be clearer now.

This is what happened. Glue the ring for the box onto the crossbar.

Here's the first fitting. The bike is ready, all that remains is to make the seat, front fender and headlight.

I'll show you how I did it. We take a thick file, I took a transparent folder (it’s more convenient, the file starts to squirm). On a piece of paper we draw what we want to do: I have a seat and a wing. We coat Titan with glue and begin to lay it out with twine. I took a lighter one to set off the whole bike. We wait 1 minute, when the part has set a little, remove it from the folder and turn it over and give it the desired shape. We wait a little, the glue dries quickly. Then we cut off the unnecessary glue from the sides with scissors and glue it to the bicycle using a hot gun. I cut the wing into 2 parts, cut out a recess at the cut point, and attached it to the bicycle using a hot gun, then 2 parts. Well, the seat and the headlight. It’s easy to make the headlight, twist it into a circle and glue it to the file, when it’s dry I glue it to the bike, with a coffee bean in the center.

Yes, I also wrapped the handles around the steering wheel with light twine and glued coffee beans to the wheels... And decorated the box.

Here it is ready!

This is the hanger on the steering wheel.

Front view. The steering wheel was decorated with contour paints.

Back view.

Casket.

Here is a box without a flower, you can see the narrow neck...

This is how it is removed...

And it stands on a wrapped ring, everything is stable!

Here's a closer look at the box...

Donyshko. Everything is wrapped with twine and double-sided tape.

Front wheel...

Photo on the shelf.

Sweet design. Planter well and bicycle made of twine and cocktail tubes

I would like to introduce you to the craftswoman Sjusen and her wonderful works. The planter well and bicycle are made of cocktail tubes and twine. As the author writes, she did the work out of hopelessness (there was no wire), from laziness (I was too lazy to go to the garage to get the wire) and from impatience (the author was not going to wait for someone else to do similar work). Here is a clear example of how “bad habits”))) allow you to create masterpieces with your own hands) Many thanks to the author for the pleasure of watching and for the accessible master classes!

Let's start with the well. The well is functional, you can turn the wheel and raise and lower the bucket.

We will need: twine, cocktail straws, coffee beans, hot glue, scraps of cardboard or ceiling tiles:

From cardboard we cut out a strip the length of an A4 sheet, 6 cm wide and connect it with a stapler or glue into a ring:

We cut the cocktail tubes into 6 cm pieces, wrap each with twine, 36-38 pieces in total:

Cover the ring with tubes:

We cut out parts from ceiling tiles or thick cardboard: a circle with a diameter of 11 cm (2 parts), a circle with a smaller diameter (1 part), a rectangle 6X12 cm (2 parts), a “peg” 10 cm high, 2.5 cm wide and with a hole in the middle (2 details):

We wrap all the parts with twine:

Decorate with grains:

Glue the bottom into the cone (a smaller circle, according to the diameter of the cone):

We glue the wrapped circles to the cone, one from below, the other from above, to hide the protruding “tails”, we glue a braid of twine around the circle. everything turns out neatly:

We glue the “pegs” onto the base of the cone:

We wrap a tube about 15 cm long with twine, but only the very beginning:

We decorate the tip and insert it into the holes of the “pegs”:

We wrap the rest of the tube with twine, up to and after the 2nd peg. So the tube will spin and the well will do its job (raise and lower the bucket):

We model a bucket, a handle made of wire, a bucket made of cardboard (can be made from a lid of a suitable size):

We fix one end of the twine rope with glue on the handle of the bucket, and we wind the other end on the crossbar of the well and also fix it with glue:

We check that the wheel should spin and raise (lower) the bucket:

We glue and decorate the roof parts. We fix the roof:

POTS BICYCLE

All we need is twine, cocktail straws, coffee beans for decoration, hot glue and scraps of ceiling tiles or cardboard:

From the scraps of ceiling tiles we cut out 3 blanks for wheels (you can circle a reel of large tape and then use this wheel size as a guide; you can glue 2 blanks for each wheel to make them more stable - then there are 6 blanks in total):

Wrap with twine:

From 4 cocktail tubes we make these blanks (about 2 cm before and after the fold) and wrap them with twine

Glue with hot glue like this:

We insert it into the circle, the wheel is ready (we make 3 such wheels). I got one wheel with a diameter of 11 cm:

We take another tube, bend it and stretch it a little in the fold (it stretches well):

We insert one piece remaining from the blanks for the wheels into this bent tube - to do this, cut the bent tube a little and insert a straight line with a drop of glue into it. We make two blanks and wrap them with twine

For the steering wheel, cut 2 blanks (2 cm before the bend and 3 after) and connect them

And one more blank - a straight tube about 11 cm long (if you are afraid that the bicycle will be unstable, you can insert skewers of a suitable size and diameter inside)

We wrap it with twine and decorate it with coffee beans “pots” (various jars of processed cheese, sour cream, jelly, ice cream, etc.):

We decorate the 2 rear wheels with grains on one side:

We decorate the side parts of the straight workpiece and the “steering wheel” with grains so that everything is neat:

Let's start assembly. We insert a straight tube into the rear wheels and secure it with glue:

In the front wheel, still without decoration, we insert 2 double blanks like this (I tried it differently - it’s ugly), fix it with glue (you can strengthen the axles with skewers by inserting them inside the tubes)

We insert a piece of tube (1.5-2 cm) between the upper tubes and glue it in:

Wrap with twine:

We glue the lower axles to the rear wheels:

Glue the steering wheel and flowerpots

Well, what do you think of the idea of using cocktail straws and twine? They can make excellent crafts for interior decoration; you can give them as a gift or sell them for the upcoming holidays. Some people make good money from manual work, and there are people who earn money on the Internet) You can find out how to make money in online casinos on the website http://onlinecasinogid.com/blackjack. Modern online casinos provide an opportunity not only to enjoy your favorite game, but also offer favorable bonuses and conditions for beginners. You can find out more about the history and development of the most popular games on the website.